Advantages in design of snail sludge dewatering machine

- Nov 26, 2020-

Stacked screw sludge dewatering machine is currently a very widely used sludge dewatering equipment, and it has many advantages in design.

1. First of all, when designing the snail sludge dewatering machine, high-quality steel is mainly used in the structure of the main shaft. This material is still processed by heat treatment, so it has a long service life and good effect. The screw stacking sludge dewatering machine is also designed with a brake opening and closing arm inside, which has very good braking performance. This design can make the screw stacking machine stop quickly.

2. The inner cylinder and outer shell of the stacked screw sludge dewatering machine are made of stainless steel materials, so the corrosion resistance of the inner cylinder and outer shell is particularly good, including the cage base and the chassis are all selected cast iron in the design Material, in order to ensure the stability and firmness of the floor of the screw stacker.

3. The snail stacking sludge dewatering machine adopts a three-legged suspension structure, so the stacking machine will not cause foot vibration due to the unbalanced load in the rotating saucer during operation. The drive part of the screw stacking machine is also designed with triangular belt drive, which can make the machine run smoothly.

4. No manual operation is required. The whole process of automation only needs to be turned on and off by pressing the switch, which saves labor costs. There are no vulnerable parts, and the entire machine is made of 304 stainless steel, with a service life of more than ten years, will not be corroded and wear-resistant, and the plate frame and belt type need to replace the filter cloth, which is frequent and expensive.

https://www.shuhangmachinery.com/