The Filter Cartridge Production Line separates liquid or solid particles in the gas, or makes sufficient contact with different substances to accelerate the reaction time, which can protect the normal operation of the equipment or the cleanliness of the air. When the fluid enters the filter element with a certain size filter, the impurities Blocked, and the cleaned stream flows out through the filter element. The liquid filter element allows the liquid (including oil, water, etc.) to clean the contaminated liquid to the state required for production and living, that is, to achieve a certain degree of cleanliness of the liquid.
The filter production line can be made into 1-6 nozzles, and the filter element can be used to tighten the outer stepped filter mechanism. At present, the output is also greatly improved. Our largest production line of melt-blown filter can achieve 6000 (110g). The machine realizes automatic operation, automatic feeding, automatic cutting and automatic cutting. Unattended operation can also be carried out continuously for 24 hours.
The inner and outer diameters of the filter production line only need to replace the winding shaft to realize the production of different products, and the length can also be adjusted arbitrarily. The filter precision of the filter element can also be adjusted from 1-100um. The qualified rate of continuous production is >99%. The melt-blown filter element is a tubular filter element made of non-toxic and odorless P particles, which is heated, melted, spun, drawn and received. If the raw material is mainly made of polypropylene, it can be called PP melt-blown filter.