CTO activated carbon filter cartridge production line production process introduced

- Mar 27, 2018-

Under normal circumstances, in the CTO activated carbon filter cartridge production line, a host can only produce one size of internal and external diameters. The inner diameter and outer diameter of the carbon rod are customized according to the customer's requirements. The length can be arbitrarily cut according to the customer's requirements. The overall layout of CTO activated carbon filter cartridge production line is usually (1.5m * 9m), the minimum area of 13.5 square meters, usually using 20 to 30 square meters.

 

The conventional size of carbon rod produced by CTO activated carbon filter cartridge production line is as follows:

Internal diameter: 28, 32MM

Outside diameter: less than, equal to 65MM

Production line quota power: 17KW

After the CTO activated carbon filter production line enters the normal operating state, it generally has an automatic heat preservation function when the specified temperature is reached, and no longer consumes electricity. When the temperature drops, the temperature automatically rises to a specified temperature. )

 

CTO activated carbon filter cartridge production line production process introduction:

In the first stage, we first need to prepare the required materials, and then put the raw materials in a blender and stir them evenly. Then, the well-stirred raw materials are sent to the extruder of the CTO activated carbon filter core production line through automatic feeding. The carbon filter core is molded through the mold, and after being cooled by the water tank, one worker cuts it and places it on the cutting machine to cut into the size required by the customer.

 

Next, along with the operation of the CTO activated carbon filter production line, the non-woven fabric, grid cloth, and the end cap were glued on the dispenser, and the heat shrinkable film was packaged to make the activated carbon filter finished product.

 

http://www.shuhangmachinery.com/