General type and equipment maintenance of sludge dewatering equipment

- Jun 10, 2019-

After the sewage station treats the sewage, some sludge will be produced. If these sludges are discharged without any prior treatment, they will only cause serious damage to the environment. Therefore, it is very necessary for environmental protection to treat them with high-efficiency sludge dewatering equipment and then discharge them.


In general, sludge dewatering equipment mainly has the following types. The Diesel sludge dewatering machine mainly achieves the effect of sufficient dewatering by gravity concentration. After use, the filtrate of the sludge will be discharged from the filter joint. The plate and frame sludge dewatering machine is different from other dewatering machines in that it discharges the filtrate through the filter cloth mainly by extrusion of the plate frame after it has been worked.


The centrifugal sludge dewatering machine mainly relies on the action of centrifugal force to allow the sludge to form solid-liquid separation due to the difference in specific gravity, and then discharge the filtrate. The main body of the belt sludge dewatering machine is a two-stage tensioned filter belt, so it is called a belt type. When working, its sludge dewatering effect is achieved by the tension of the filter belt itself.


First of all, we definitely know the correct operation method of this device, then this can be obtained from the manual. In fact, the operation of this device is very simple, just knowing some processes, especially the one-button switch machine is much simpler. But we should pay attention to where the equipment is stored where it is better.