This depends on the type of problems that occur in the snail sludge dewatering machine, and the solutions for different situations are different.
1. The snail sludge dewatering machine does not operate. When the snail sludge dewatering machine is not in operation, the electrical wiring should be checked under normal circumstances, but only when the electrical and wiring are OK during the initial commissioning. Maybe it is a short circuit or it may be aging. If the line problem is ruled out, we will check whether there is a problem with the reducer. This check mainly depends on whether there is heat or abnormal noise.
2. The screw stacking sludge dewatering machine can work after the power is turned on, but its sludge output effect is not ideal, and the working efficiency is relatively low. Generally, the new screw stacking machine should not have such a phenomenon, if it is used for three or four years The machine should have such a situation more or less. In fact, after encountering such a situation, just contact the manufacturer of the screw stacker and transfer the spindle of the screw stacker to the original screw stacker sludge dehydrator manufacturer for repair work. can.
3. The machine parts are aging. Find the aging accessories directly and replace them.
For other problems or failures of the snail sludge dewatering machine, please refer to the product manual of the machine. There are solutions for various failures.
The above is the answer to how to repair the problem of the screw stacker, I hope it will be helpful to you.