The CTO activated carbon filter manufacturing machine mainly uses coal-based carbon with an iodine content of 900 or more as a filter material, and is subjected to three times of desulfurization iron processing or high-quality plant carbon, and is subjected to food-grade binder sintering compression molding. The compressed activated carbon is wrapped with a layer of non-woven fabric inside and outside, ensuring that the carbon core itself does not drop the carbon powder. The carbon core is provided with a soft nitrile rubber gasket at both ends, so that the carbon core is loaded into the filter cartridge. Good sealing.
The CTO activated carbon filter manufacturing machine is used in water treatment equipment to remove residual chlorine, chemical pesticides, heterochromatic, odor, and fine impurities, and is used in the third stage to protect the RO membrane in a pure water machine. The service life is 3-6 months.
The CTO activated carbon filter manufacturing machine regularly checks whether the filter inlet surface is clogged with any foreign matter and whether the surface of the filter material is damaged. If the surface of the filter is clogged, it should be removed. If the surface of the filter material is damaged seriously, it must be replaced with a new filter material or Replace the new filter and reinstall it. When installing the filter, ensure that the sealing edge of the frame is well sealed to prevent air leakage.