Selection and installation of CTO carbon block filter cartridge machine

- Nov 02, 2018-

The unit operation mode adopted by the CTO carbon block filter cartridge machine can be flexibly increased according to the change of water quantity or the number of filters can be deleted, which is easy to be expanded and expanded. The small footprint and beautiful appearance: it integrates the traditional three-stage reclaimed water treatment process, saving about 70-80% of the land; the appearance is more beautiful and compact.

Selection of CTO carbon block filter cartridge machine

CTO carbon block filter machine must be clear before the selection of the system name, water quality, water quality, system pressure, automation and other basic parameters.

CTO carbon block filter machine installation

1 Install the water collection system and open the upper cover (or upper flange cover).

2 Remove the water distribution system.

3 The washed large gravel and small gravel (ie, the support layer) are sequentially loaded into the filter.

4 Load the washed activated carbon (ie the filter layer).

5 Fit the upper cover (or upper flange cover) and the corresponding seal ring and tighten (or tighten the fixing bolts).

6 Connect the operating system piping and the corresponding other connections.

When the CTO carbon block filter machine is operated, the sealing ring between the upper cover, the water distribution system, the water collecting system and the cylinder must be correctly installed to avoid water leakage at the joint.

http://www.shuhangmachinery.com/