Solution to the abnormal interruption and shutdown of the snail sludge dewatering machine

- Nov 19, 2020-

First, we must analyze why the stacking screw sludge dewatering machine is interrupted. The possible reasons are as follows:
1. Blockage occurs
2. Unstable voltage
3. Aging accessories
4. Other reasons: such as manual operation errors or other force majeure factors.

In view of the above situation, the solutions are as follows:
1. When the screw stacker is blocked (in general, the screw stacker will not be blocked), there is a serious blockage in the pipeline, and the machine may temporarily stop running. At this time, the operating requirements must comply with the operating instructions of the screw stacker, which is suitable for the treatment of fluid mud.
2. If the voltage is unstable, it will also cause abnormal interruption of the screw stacker. Under working conditions such as mines and oil fields, the voltage of the screw stacker may be unstable, which may cause abnormal power failure. Ensure the stability of the power supply voltage and ensure that the power cord meets relevant requirements.
3. The aging of the accessories will also affect the operation of the screw stacker, or even interrupt it abnormally. Such as the aging of the reducer or the moving ring has seriously exceeded the working load time.
4. Other man-made operation problems did not follow the training process, causing the screw stacker to be abnormally interrupted. Need to carry out the operation of the screw stacker under guidance.
In any case, when the screw stacker is interrupted abnormally, the power supply should be cut off immediately. The replacement should be replaced and the maintenance should be overhauled to ensure that everything is normal before starting work.