The relevant equipment in the active carbon block filter cartridge production line adopts a more advanced automatic control system. When the actual application is applied, the activated carbon is added with a binder (such as a PE resin) and then heated and extruded. .
For this activated carbon block filter production line features, first of all, in terms of its own will also have the dechlorination and deodorization and organic solvent decolorization effect will also appear better; equipment, adsorption capacity is relatively strong, on its specific The mechanical strength is relatively high; when the equipment is processed, the density is relatively uniform and the service life will be longer; the equipment will not release the carbon powder when it is working.
The application of active carbon block filter cartridge production line, because of the use of water purification treatment, can achieve the decolorization of the food; after the activated carbon block filter production line in the application, on this field repair wells and its water injection filter; activated carbon block filter production line Will be directly applied to the chemical liquid and electroplating; the production line itself is to achieve 24 hours of continuous new work.
The rated power of the active carbon block filter cartridge production line will also be 16.45kw/set; the actual power, in fact, the power when the machine is switched on is also at 8kw/h; on this raw material is also used activated carbon and PE glue. The default internal diameter will also be at 32mm; the default external diameter will be at 63mm; for this filter element, it will be at 5 inches, 10 inches, 20 inches, 30 inches, other sizes can be customized.
In terms of output of the activated carbon block filter production line, the direct cooling carbon rod output of the cooling system is 300-400 mm per minute; if the cooling system directly cools the extruder die, the output is actually 150-200 mm per minute; for the activated carbon block filter The extruder on the production line can only be used for an internal diameter such as an internal diameter of 30mm and an external diameter of 63mm. If other sizes are required, the extruder die must be replaced.