Decanter centrifuge is a kind of high-tech mechanical equipment, and it is inevitable that some failures will occur. According to many years of experience, the vacuum drop is the most common failure of the decanter centrifuge. The solution to the failure of the decanter centrifuge, hurry up and collect it!
When the true degree of the decanter centrifuge drops, you must check the vacuum system and replace the oil so that the vacuum degree will slowly return to its original value. There are also some small desktop decanter centrifuges, which will become stuck on the shaft after a long time. At this time, be sure not to hit hard, otherwise it may damage the decanter centrifuge shaft and damage the decanter centrifuge. Some unexpected accidents may happen.
Correct operation and reasonable maintenance are the keys to ensure the normal operation of the decanter centrifuge and prolong the service life of the decanter centrifuge. When using the decanter centrifuge, it must be placed horizontally, approximately at a distance of more than 10 cm, and a good general environment must be maintained. The room temperature should not exceed 30 degrees. Secondly, when the external humidity is high, the water in the decanter centrifuge cavity will evaporate slowly. At this time, it must be removed in time to prevent the instrument from rusting. When using a decanter centrifuge, it is strictly forbidden to run idling without the rotor to prevent the centrifuge shaft from bending. Before the decanter centrifuge is operated, it must be confirmed that it has been placed firmly and tightened, and the rotor cover must be stable.