Meltblown filter element equipment In general, in order to improve the quality of the outflowing water, people will let tap water flow through many filter element equipment. Therefore, when we buy a water purifier, we must first look at the water purifier with several stages of filtration . The primary and secondary water purifiers only have one or two filter elements, which are basically obsolete products on the market. The filtered water is of poor quality and is best not to be used. If you want to save money, you can consider a water purifier with a three-stage filter element; if you pay attention to hygiene, safety and health, a water purifier with a level four or higher is the best choice, because when the tap water is purified by a five-level filter element, The impurities, bacteria, and viruses in the water will be completely removed, and the feeling in the mouth will be very pure and sweet.
If a three-stage or four-stage water filter is PP cotton or hollow fiber in the first filter element of the water inlet, it must be replaced after a period of use, because PP cotton and hollow fiber cannot be used. It needs to be changed frequently for cleaning, otherwise it will cause the blockage of the filter element equipment, and the blockage will rot, ferment, and odor, making the filtered tap water polluted for a second time.
When we purchase water purifiers, we are good at choosing high quality meltblown filter element equipment, such as precision ceramic filter element equipment. In the water purifier, the precision ceramic filter element equipment must be used as the first-level filter element equipment, so that all impurities and bacteria in the tap water can be blocked on the surface of the ceramic filter element. After using it for a period of time, it only needs to be cleaned and not used. Replace it. And the precision of the last filter device at the water outlet must reach 0.01 micron, which can filter bacteria and viruses in the water as much as possible.