When installing the meltblown filter element equipment, what issues should we pay attention to? Let's take a look together! Meltblown filter element equipment is generally installed after the after cooler and gas storage tank, as close as possible to the point of use and the lowest temperature. The working pressure does not exceed the maximum pressure indicated on the filter.
Meltblown filter element equipment should not be installed after the quick opening valve and prevent backflow and impact. Unscrew the housing and remove the old filter element. Clean the meltblown filter element housing. Replace the new filter element, do not omit the sealing ring, and add vaseline, the filter element should be installed tightly. Meltblown filter element equipment should be installed vertically, leaving enough space below to replace the filter element. Larger filters should be properly supported in the pipeline.
Isolate the meltblown filter element equipment, close the air intake valve or compressed air supply system, and then completely close the air outlet valve or close the air outlet valve after the pressure is completely released. In daily life, we have to carry out regular inspections of meltblown filter element equipment.