Winding filter cartridge making machine configuration features

- Sep 05, 2018-

In the normal operating state, the winding filter cartridge making machine generally has a winding speed of 60 to 320 meters per minute and a winding diameter of up to 200 mm. When the diameter of the winding exceeds 200 mm, it can be customized according to user requirements within a certain range. The power supply of the winding filter manufacturing machine is generally AC380, 50HZ, and other can be customized according to customer needs.

 

In the winding filter cartridge making machine, different motors can be configured in combination with the production requirements. For example, when the length of the winding filter is less than 30 inches, the speed of the three-phase asynchronous motor is 2800 rpm. If the length of the winding filter is greater than or equal to 30 inches, the speed of the three-phase torque motor is 1400 rpm.

 

Introduction to the components of the winding filter cartridge making machine:

The skeleton material is usually PP, stainless steel, and other materials can be customized.

The material of the reciprocating screw is polyoxymethylene.

The inner diameter of the filter element is generally 28mm and 30mm, and other sizes can be customized.

The outer diameter ranges from 29mm to 200mm.

The maximum outer diameter can reach 200mm.

In addition, the precision of the filter elements produced is also different, such as 1 μm, 5 μm, 10 μm, 20 μm, 50 μm, 100 μm, and the like.

 

http://www.shuhangmachinery.com/