Sludge Press Machine Basic Info
Model NO.: Sludge screw press dewatering machine
Usage: Industrial, Home, Agriculture, Hospital, Municipal wastewater sludge dewatering
Screw Shaft Diameter: 300mm
Method: Physical Treatment
Ds Sludge Treating Capacity: 50~70kg/H
Net Weight: 900kg
Transport Package: Anticorrosion Wooden Cases
Origin: Wuxi, Jiangsu, China
Sludge Press Machine Introduction
The screw sludge press machine is integrating with auto control cabinet, sludge thickening & dewatering body liquid collection tank. Therefore, the high efficiency flocculation, continuous sludge concentration, dewatering and filtrate collection can be automatically completed all in one, the collected liquid will be reflux or emissions finally.
Advantages of Sludge Press Machine
1. Can be widely used in municipal sewage, food, slaughtering breeding, printing and dyeing, oil chemical industry, paper making, leather, pharmaceutical and other industries of sludge dewatering;
2. Exclusive pre-concentration design, applicable sludge concentration of 2000mg/L-50000mg/L;
3. Due to the innovation of the structure design, it is highly suitable to various high and low concentration sludge, most especially for the oily ones.
Due to rotation of helical axis, the moving rings begin detaching from the fixed rings while continuously starting the self-cleaning process. As a result, the ubiquitous clogging is avoided. Therefore, it can handle oily sludge without any trouble while separating the water from the sludge easily. In addition, there is no need to add large quantity of flushing water and there is no odor and no secondary pollution during the dewatering process.
Fully Automatic Control
There are no easily blocked pieces such as belt and filtration pore in Multi-Disk Screw Press. Combining with the auto control system, the machine runs very safely and simply and can be programmed according to the requirement of the users. It can operate automatically for 24 hours, unmanned.
Save Running Cost
Multi-Disk Screw Press works by the machine's internal pressure and needs no large scale integrations like rollers. It saves energy and water and has very minimal noise because of low running speed (2-4 r/min). The average unit power consumption is only 0.1-0.01kwh/kg-DS (1/8 of Belt Press and 1/20 of Centrifuge), and can greatly reduce the running cost of wastewater treatment system.
Without secondary pollution
The screw shaft rotational speed about 2-3r/min, no vibration and noise is very small ; The laminated with self - cleaning function, plugging does not occur, only a small amount of water washing, without secondary pollution, and sludge at such a slow running under the operating condition, the smell does not spread, thereby creating a great work environment!
Contactless, Wear Free Structure Design
Multi-Disk Screw Press uses the contactless wear free structure between the disks and screw shafts, thus the service life of the Screw shafts and the rings will be greatly extended. The treatment capacity of equipment and processing effects can be improved in combination with other optimization design.
Decrease Capital Investment
Multi-Disk Screw Press can treat sludge in aeration tank and secondary sedimentation tank without setting sludge thickeners. Therefore, this can decrease the total investment, avoid phosphorus release from the sludge thickeners and sludge storage tanks and enhance phosphorus removal effect of the wastewater treatment system.
High Resistance to Oily Sludge
Promote the phosphorus removal capability Dewatering sludge under aerobic conditions, it does not occur phosphorus release, so as to enhance phosphorus removal function of the whole sewage treatment system.
If you are interested the Sludge Press Machine, welcome to contact our factory for more details. We are one of the leading China manufacturers and suppliers equipped with a productive factory at your service. The quality products made in China and good customized service with competitive price can be assured.